SGH-600
*2767*3855#
S100, S300, V200
*2767*7822573738#
A300, A800
*2767*637#
X100 S500 E700
*2767*688# (not work in new SW versions, but try anyway, no harm.)
Unlock S307
1. Turn off your phone, put in a SIM of a provider
that it is not locked to, and turn it back on.
2. At the wrong card message, type *#9998*3323#. A message will pop up telling
you to press exit, so hit the right softkey. Choose number 7 (or 8 or 9 work,
I think). Your phone will reboot and your SIM will work.
3. Type *0141# and then hit call. This will give you a message saying your phone
is personalized.
4. Power down your phone and insert a SIM card other than the one that is in
it. Power back up your phone.
5. At the SIM code prompt type 00000000, that is 8 zeroes.
Your phone should now be unlocked. At least mine seems to be. Let me know how it goes. By the way, I stole all of this info from the threads below. I just kinda smashed it all together.
*2767*2878# -> Custom EEEPROM Reset
unlock C100
If use code reader, read all codes, enter #0111*code#
A110 unlock code
Turn on phone without simcard.
Enter the code: *#9998*627837793#, and phone will show "error or wrong
code".
Enter now the code: :*#9998*737#, and will appear a menu, you can use navigation
keys that will allow to select the codes: PCK , NCK , SCK , SPCK , MCK . The
code that we will need to unlock is the NCK, select and write down this code.
This code will have 9 digits, but you only will need the last 8 digits, so forget
the first digit.
Now enter the code #0111* and write the last 8 digits that of the NCK code that
you have got, and press key #.
It will appear the message "CANCELLED CUSTOMIZATION" . And now your
phone is free and unlocked.
By example: If NCK code of 9 digits that you got from your phone is: 123456789
we will forget the digit 1 and we must to enter: #0111*23456789# and your phone
will be unlocked.
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*2767*3855# -> Full EEPROM Reset ( THIS CODE CAN REMOVE SP-LOCK ON SOME PHONES!!
)
*2767*2878# -> Custom EEPROM Reset
*#7337# will work for all X100 and majority of new ones bar the i think x400 the one on virgin
X600
#*7337#
E715
This works on most versions:
1. Insert the wrong sim card into the phone, a message saying “wrong sim card”
should appear on the screen. You can only make SOS calls at this point.
2. Enter in the phone *#9998*3323#
3. You will now see the option ‘Exit’ on the left side of the phone. Hit the
left soft key to exit.
4. Press the “7” key on the key pad. Your phone will now reboot. (Turn off &
turn on automatically.)
5. After the phone turns back on it will be unlocked to your sim card in the
phone. To finish unlocking the phone do the following steps.
6. Enter *0141#
7. Then hit the call button as if you were calling the above number. A small
box saying “Personalized” will now appear.
8. Turn off your phone take off the battery, insert a different sim card than
the one that was previously in the phone.
9. When you turn on the phone it will ask you for a “SIM unlock code” this number
is “00000000” or 8 zeros.
10. Press OK & now your phone is unlocked to all networks.
11. To change your WAP browser settings, enter *2767*927# this will reset your
WAP browser, then enter *#87927# & edit one of your profiles.
C100
code: *#9998*627837793# ...he says "wrong
operation", but in Settings is new menu "file manager" ...go
to File manager and step by step make all! Then restart, and all ok!
this solution 100% work on my C100
in file manager only reload all
;*#0523# display contrast for 2xx,nxxx
Combination Function
*#06# Shows IMEI
*#8888# or *#9998*8888# HARDWARE Version
*#9999# or *#9998*9999# FIRMWARE Version
*#0837# SOFTWARE Version
*#0001# Serial parameters
*#9998*523# or *#9998*0523# or *#0523# Display adjustment menu
*#9998*523#
*#9998*523*0# (for SGH -Rxxx, -Nxxx) Display contrast adjustment menu (only
for G60RL01W version)
*#9998*289#
*#9998*289*0# (for SGH -Rxxx, -Nxxx) Ring-tone frequency
*#9998*636#
*#9998*636*0# (for SGH -Rxxx, -Nxxx) Memory status
*#9998*746# or *#9998*0746# or *#0746# SIM-file's size
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*288# or *#9998*0288# or *#0288# Battery status (capacity, voltage, temperature)
*#9998*842# or *#9998*0842# or *#0842# Vibro test (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*862#
*#9998*862*0# (for SGH -Rxxx, -Nxxx) Voice coder mode setup (normal, headphones
or SP connection)
*#9998*324#
*#9998*324*0# (for SGH -Rxxx, -Nxxx) Setup screen
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9125# Smiles mode in battery charge mode
*0001*s*f*t# Serial parameters change
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*3855# Full EEPROM clear (SP-unlock). Also changes IMEI to 447967-89-400044-0
*2767*2878# Custom EEEPROM clear
*#9998*masterpwd# File manager activation (Error Code message should appear)
*#9998*4357# Help Menu (File manager should be activated)
*#9999*0# NetMonitor Mode (File manager should be activated)
*#9998*377# or *#9998*0377# Error log (File manager should be activated)
*#9998*5646# ?hange operator logo at startup (File manager should be activated)
*#0RTC# or *#9998*782# Run time clock
*#DAIEXIT# Digital Audio Interference Off (switched of until exit from this
mode)
*#DAIENTER# Digital Audio Interference On (switched on until exit from this
mode)
*#0007# + green
*#0040# + green Phone reload
*2767*cust# removes phone security code for Samsung
R200
without sim ...
X426:
*#06# IMEI number
*#9999#albo*#0837# Software version
*#0324# Net Monitor
*#0523# Chaning LCD contrast
*#0377#albo*#0246# Memory info
*2767*3855# Reset memory (SIMLOCK`a removing!!!)
*2767*2878# Reset CUSTOM memory
*#9998*228# Battery state
*#9998*289# Alarm beeper
*#9998*842# Vibra test
Let's sum up !
---SGH-600:
*2767*3855#
---S100, S300, V200:
*2767*7822573738#
---A300, A800
*2767*637#
---X100, S500, E700
*2767*688#
--- SGH-E700 new model, X-100, X400, X600
#*7337#
---r220.
*0141#
---C100
*#9998*627837793#
_____________________
*#06# Show IMEI
*#9999# Show Software Version
*#0837# Show Software Version (instructions)
*#0001# Show Serial Parameters
*#9125# Activates the smiley when charging
*#0523# LCD Contrast
*#9998*228# Battery status (capacity, voltage,
temperature)
*#9998*246# Program status
*#9998*289# Change Alarm Buzzer Frequency
*#9998*324# Debug Screens
*#9998*364# Watchdog
*#9998*377# EEPROM Error Stack - Use side keys to select values
*#9998*427# Trace Watchdog
*#9998*523# Change LCD contrast
*#9998*544# Jig detect
*#9998*636# Memory status
*#9998*746# SIM File Size
*#9998*778# SIM Service Table
*#9998*785# RTK (Run Time Kernel) errors - if ok then phn is reset,
info is put in memory error
*#9998*786# Run, Last UP, Last DOWN
*#9998*837# Software Version
*#9998*842# Test Vibrator - Flash the screenlight during 10 sec
and vibration activated
*#9998*862# Vocoder Reg - Normal, Earphone or Carkit
*#9998*872# Diag
*#9998*947# Reset On Fatal Error
*#9998*999# Last/Chk
*#9998*9266# Yann debug screen (Debug Screens?)
*#9998*9999# Software version
*0001*s*f*t# Changes serial parameters (s=?, f=0.1,
t=0.1)
*0002*?# unknown
*0003*?# unknown
FOR NEW SGH (R210, T100, A300...)
if code is in format *#9998*xxx#
try write in this *#0xxx#
SGH-600 SGH-2100
*2767*3855# Full EEPROM Reset (THIS CODE REMMOVES
SP-LOCK!
but also changes IMEI to 447967-89-400044-0
*2767*2878# Custom EEPROM Reset
SGH E700
*2767*688# remove USER CODE and SIMLOCK
SGH V200
Unlocking:
Power on the phone without SIM card and type these codes:
*2767*63342# and press green button
*2767*3855# and press green button
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button
Phone will be unlocked, but all trims are reseted
!!!
Mobile phone must be fully charged
SGH S500
Unlocking
*2767*MVT# (*2767*688#) E2P MVT Reset
*#SIMLOCK# (*#7465625#)
This works 100% SGH-X450, but has to be completed
EXACTLY as it's written:
1. Insert the wrong sim card into the phone, a message saying “wrong sim card”
should appear on the screen. You can only make SOS calls at this point.
2. Enter in the phone *#9998*3323#
3. You will now see the option ‘Exit’ on the left side of the phone. Hit the
left soft key to exit.
4. Press the “7” key on the key pad. Your phone will now reboot. (Turn off &
turn on automatically.)
5. After the phone turns back on it will be unlocked to your sim card in the
phone. To finish unlocking the phone do the following steps.
6. Enter *0141#
7. Then hit the call button as if you were calling the above number. A small
box saying “Personalized” will now appear.
8. Turn off your phone take off the battery, insert a different sim card than
the one that was previously in the phone.
9. When you turn on the phone it will ask you for a “SIM unlock code” this number
is “00000000” or 8 zeros.
10. Press OK & now your phone is unlocked to all networks.
11. To change your WAP browser settings, enter *2767*927# this will reset your
WAP browser, then enter *#87927# & edit one of your profiles.
A800
*#06# imei
*#7465625# view all lock
*#7465625*C# none
*#8888# hw ver
*#9999# sw ver
*#8999*C#
*#9988*C*C#
*#8989*C# - work when ? is BAT, LOCK, LOG itc.
*#0000#
*#9324# none
*#9837# none
*#0043# nothing happen
*#0355# nothing happen
*#0376# nothing happen
*#0374# nothing happen
*#0994# nothing happen
*#0032# nothing happen
*#0880# nothing happen
*#0359# nothing happen
*#0973# nothing happen....
itcetera?
R220,
Trun off and trun on back with no sim card..
on sim card message press *2767*2878#
set disply reset message, will automaticaly truned off
now put sim card
trun on...
v200 *2767*7822573738# tested.100% successful........it will be unlocked
Samsung:
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is
no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete
for samsung
*#9998*228# : Battery status (capacity, voltage, temperature)
*#9998*246# : Program status
*#9998*289# : Change Alarm Buzzer Frequency
*#9998*324# : Debug screens
*#9998*364# : Watchdog
*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and
ok.
*#9998*427# : Trace Watchdog
*#9998*523# : Change LCD contrast - Only with version G60RL01W
*#9998*544# : Jig detect
*#9998*636# : Memory status
*#9998*746# : SIM File Size
*#9998*778# : SIM Service Table
*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is
put in memory error.
*#9998*786# : Run, Last UP, Last DOWN
*#9998*837# : Software Version
*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration
activated.
*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# : Diag
*#9998*947# : Reset On Fatal Error
*#9998*999# : Last/Chk
*#9998*9266# : Yann debug screen (=Debug Screens?)
*#9998*9999# : Software version
If the up Codes doesn't work, you should change *#9998*
to *#0. i.e. *#9998*523# change to *#0523#. An other thing that will help is
to remove your SIM card. *0001*s*f*t# : Changes serial parameters (s=?, f=0,1,
t=0,1) (incomplete)
*0002*?# : unknown
*0003*?# : unknown
SP-unlock SGH-600 (and also SGH-Sgh-600)
*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0. (Doing this is illegal)
*2767*2878# : Custom EEEPROM Reset
*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600
for d500
*#11[quote]11# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don't Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version
#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog
Press ## followed by the OTKSL
SVC menu will be displayed
Press 1 for Phone #
Enter the 10 digit MIN and press OK
MIN that was entered will be displayed press OK
SVC Menu will display press 3 for NAM
Enter the 4 digit Home SID press OK
Press END and handset will power cycle
Tap on the Phone Icon with stylus
Press #907*9#0 ENTER LOCK should appear on screen
ENTER OTKSL
SVC MENU will appear press 1
Enter 10 digit MIN and then press SAVE
Press SAVE again
Press 3 and then press SAVE 6 times
Enter the HOME SID and press SAVE once
Press END key twice
Samsung A400 and A460
Enter ## and OTKSL
Press 1 for Basic at MENU (1 of Phone # when using the MSL)
Enter 10 digit MIN and press OK
At 1.Basic Menu press the END key
Handset will power cycle
Press MENU
Press 6 0 (3500) 8 2 0 (8500/6100/N200)
Enter OTKSL
Press 1 at SVC MENU Screen
Enter MIN and press OK
Press OK 4 times
Enter SID (4654) and press OK
Press END key
Programming is complete